(401)-356-0230

706-C  St. Paul Street
North Smithfield, RI 02896
Office: 401-356-0230

Mass Lic#: 59652          

RI Master Pipefitter Lic# 7047

Our Work Is Our Calling Card

“Do good work and take care of your clients, and you will have more work than you can handle.”
– John Perry

We’ve been designing, engineering, consulting, and installing radiant floor heating and snow melting systems since 1994. We engineer systems in residential and commercial settings to maximize our customer’s comfort, health, budget and fuel efficiency. We are not an HVAC or plumbing business. We don’t do AC, plumbing, steam, forced air or ductwork. Our only focus is state-of-the-art European Radiant Heating Systems, Snow Melting Systems, and GeoThermal and Solar solutions engineered, installed, and supported with the highest level of expertise. Our installation and service area consists of Rhode Island and Southern Massachusetts. We are passionately committed to the Radiant Heat business are passionately committed to customer satisfaction! Thanks for visiting us! 

In-Floor Radiant Heat

Snow Melting Systems

Viessmann Boiler Service

Advanced Comfort Systems, Inc. has devolved a few plans to help you maintain your heating equipment to the utmost condition. We feel that by inspecting your SYSTEM as a whole you will have fewer problems and when you do they will be very minimal and easy to take care of.

Our system approach with your heating equipment is very much in line with the Viessmann way. We feel by checking all the components of the system and not just that of the burner and boiler we can head any potential problems off by fixing them before they become a problem.

You can think of these maintenance plans as Preventive Maintenance. With preventive maintenance your equipment should last much longer and provide you with the energy efficiency you sort when you made the investment into Viessmann equipment.

We have invested the time to get factory trained on Viessmann equipment and continue to do so. We only install Viessmann equipment so our technicians are very knowledgeable with the correct installation methods and programming of the controls.

With the Oil Heating systems we have come up with two plans; one is to service the system every six months. With today’s oil and the size of oil nozzles used this sometimes becomes a problem with the filters getting clogged or the nozzle getting clogged. When the nozzle gets clogged the pattern of the fire inside the boiler becomes disturbed and can create soot build up inside the fire box. When this happens it will run for some time but you are not getting the efficiency because heat is going up the chimney instead of into your home. The other is a yearly service. Included in both plans is servicing of Viessmann DHW tanks. Most people don’t have their Vitocell 100 DHW tanks serviced and this leads to equipment failure. The anode rod needs to be checked and replaced to protect the tank.

 


⇒Advanced Comfort Systems, Inc. does not sell oil and we do not require you to purchase oil from a specific company to have us do service on your equipment. We will also service your Viessmann equipment if it was installed by someone else.

Gas 

We conduct our services in “good faith” – We provide service and have confidence we will be compensated – No contracts necessary. 

During an initial or annual cleaning the following takes place on all Viessmann Gas Boilers and Domestic Hot Water Tanks.

  • Perform a cleaning of the Boiler.
  • Check electrode settings.
  • Perform combustion test with a computerized combustion analyzer.
  • Perform a gas manifold pressure check for proper setting.
  • Check for proper draft and flue gas temperature.
  • Inspect flue piping from boiler to chimney. ( Chimney Venting)
  • Inspect flue piping and Power Venter settings. (Power Vent Systems)
  • Check Vitotronic Control settings.
  • Check integrity of piping and components of the heating system.
    • Circulators
    • Air Vents
    • Ball Valves
    • Expansion Tanks
    • Copper fittings (for signs of leaks)
  • Check anode rod on Vitocell 100 tanks.
  • Flush Vitocell tanks.

If any problems are found during the initial/annual cleaning they will need to be addressed. This will be done on a Time and Material basis.

Problems that could exist include:

  • Chimney vent too big and flue gas condensation in chimney.
  • Anode rod never checked and needs to be replaced.
  • Vitotronic control never set up properly.

Oil

We conduct our services in “good faith” – We provide service and have confidence we will be compensated – No contracts necessary. 

During an initial or annual cleaning the following takes place on all Viessmann Oil Boilers and Domestic Hot Water Tanks.

  • Perform a cleaning of the Boiler.
  • Change oil filters
  • Change oil pump strainer.
  • Change nozzle and check electrode settings.
  • Set burner settings with a computerized combustion analyzer.
  • Perform an oil pump pressure and vacuum check for proper setting.
  • Check for proper draft and flue gas temperature.
  • Inspect flue piping from boiler to chimney ( Chimney Venting).
  • Set Draft regulator for proper draft.
  • Inspect flue piping and Power Venter settings. (Power Vent Systems)
  • Check Vitotronic Control settings.
  • Check integrity of piping and components of the heating system.
    • Circulators
    • Air Vents
    • Ball Valves
    • Expansion Tanks
    • Copper fittings (for signs of leaks)
  • Check anode rod on Vitocell 100 tanks.
  • Flush Vitocell tanks.

If any problems are found during the initial/annual cleaning they will need to be addressed. This will be done on a Time and Material basis.

Problems that could exist include:

  • Chimney vent too big and flue gas condensation in chimney.
  • Anode rod never checked and needs to be replaced.
  • Vitotronic control never set up properly.

What We Offer:

  • Design & Install

  • Annual Service

  • Issue Resolution